Login
or
create a New Account

separator
Cart Total: £0.00
separator


search
separator

HDB Woodlathe Specifications:

It is reassuring to know that few accessories are actually needed at the outset of a turning career.  In fact, the standard HDB200XL, featuring all the benefits described here, can be bolted directly to a bench, plugged into a 13amp (domestic) socket and your turning begun without the addition of any other accessories at all!

HDB200 Woodturning lathe - standard specification

The lathe, as delivered, comes complete with drive centre, revolving tail centre, electronic control box, toolkit and instruction booklet. The HDB now comes as standard with a 1HP Motor.

Having said that, a few well chosen items of ancillary equipment can broaden your scope or make life a little easier.  If you are not already familiar with what you might need, we recommend a few items on the HDB200XL product page.

HDB LATHE DIMENSIONS

Measurements: HDB 1000/770/350

- Bench Length:       1751 mm (69") (or to suit bed length)
- Bench Width:        351 mm (14")
- Bench Height:       680 mm (27")
- Overall HDB Length:   1850mm(72.3") / 1640mm (64.6") / 1120mm (44")
- Overall Width:      500mm (19.7")
- Bed to Center:      200 mm (8")
- Floor to Center:  1105 mm (43.5")
- Between Centers: 1050mm (41.3") / 770mm (30.3") / 350mm (13.8")
- Height Over Banjo: 155mm (6.2")

Max turning diameter with outboard turning attachment 750mm (30")

All Heights can be extended by another 30 – 100 mm by the use of the anti-vibration feet (HDB-AVF).

 HDB200XL Standard Dimensions
  • 16″ Ø swing over bed and 41.3″ between centres.
  • Headstock swivels for work up to 30″ Ø.
  • 1HP motor; electronic phase inverter and frequency control giving constant speed and high torque through turning resistance sensor feedback circuitry.
  • ON/OFF switch with T.O.N.V.R. (Thermal Overload & No Volt Release) protection. 90 – 3800rpm rotary speed control.
  • Forward/reverse switch. High load capacity M33 spindle nose with thread protector.
  • 24 pos. indexing. Precision ground 2MT swallow in head and tailstock shafts.
  • Hardened 4 prong drive centre.
  • Twin bearing HD live centre, convertable to ring centre
  • Super-efficient cam clamps on cross-slide and tailstock assemblies.
  • 250mm (10″) toolrest. Maintenance tools and manual.