Obtaining a fine finish is a common function in the production of many Wood and Metal articles and components. A high quality disc sander gives you the ability to produce the desired finishes quickly and easily.

Hegner have a reputation for producing machinery of the finest quality. Whenever thier machines are tested by the world's major craft magazines, the experts always agree Hegner machines are No.1.

It is no suprise therefore that the HSM 300 Disc sander is a highly efficient unit with

Technical Specifications:-

The HSM 300 features:-

Large 300mm Nylon Hook & Loop Discs:

Interchangeable hook & loop sanding discs are so easy and simple to change. They are a big plus in both efficiency and cost. If you wish to change grades with adhesive discs it takes time to remove the old disc - which is destroyed in the process. Not so with the hook & loop system. Simply peel off the old grade and place the new one in position; a 30 second grade change with no damage to the old disc which can be used time and time again.

Safety Brake:

When you cut the motor on a disc sander it can go on spinning silently for some time which obviously presents a danger. The Hegner HSM300 is fitted with a braking system which the operator can use to halt the run-on when the machine is switched off.

Efficient Dust Extraction Port:

The dust generated by the disc sander can be efficiently and safely drawn away by means of the dust extraction cowling. Not just a box beneath the sander the cowling is shaped to duct the dust efficently to the extraction port. With a suitable dust extractor fitted to the 100mm extraction port, virtually no dust is released into the operating environment. A reduction sleeve is supplied as standard to reduce the port to accept 58mm hose .

Large Work Table:

A generous aluminium work table 520 x 260mm wraps around both sides of the HSM300 disc sander to give firm support to your work during the sanding process. It can be accurately adjusted to any desired work angle from 0 - 45 degrees by the precition quadrant scale mounted just below the table.

Robust Fence:

The sliding fence is robustly built and is fitted with a high quality ash cheek to give you accurate angle setting whether they are square ends, mitres or any finishing angle in between. For optimum precision it is possible to lock the fence to the work table so that you can slide repeat workpieces to the disc to obtain precisely the same same angle each and every time. In conjunction with the work

No-Volt Switch:

For added workshop safety the HSM300 is fitted with a no-volt push button switch which issolates the motor should the power fail ensuring the motor will not start should the power be re-established. Re-setting the switch then restores the power to the motor.