MICRO 22 LIVE CENTRE:

Really small to make life easier for miniature work, but big on features like having three (19mm dia) sealed for life deep groove ball bearings (replaceable) and three interchangeable tips comprising a long access 9mm dia x 60° standard point (shown in situ), a 25mm faceplate and a 9mm Ring Centre with a matching Work Indenter.

25mm (1") Faceplate

9mm(3/8") Ring Centre

Work Indenter

Versatility!
The indenter & Ring Centre also double as work drives in matching Fastloc Collets.

Tips work on the simple principle of "push-in" & "pull-out"

Duplex Chucks
Revolvoing Live Centres
Marlin System
Titan Chucks

MINI 25 LIVE CENTRE :

A step up in size from the diminutive "Micro 22" the centre has an excellent profile to provide good access for most small lathe work, whilst the three larger (22mm dia) sealed for life deep groove bearings provide good axial strength and smooth running.

STANDARD 32 LIVE CENTRE :

Considerable up-rated with three large (28mm dia) deep grooved sealed for life bearings for reliable smooth running, & wider bearing spacing to ensure greater axial stability. Ideal for general spindle work, bowl & goblet support, etc. In fact a good all rounder.

Order No.

Description

Ex. VAT

Inc. VAT

 

LM220

Micro 22 Live Centre Set witout shank (to fit Marlin Shank)

   

 

LM221

Micro 22 Live Centre Set with an interchangable 1MT Shank

   

 

LM222

Micro 22 Live Centre Set with an interchangable 2MT Shank

   

 

LC251

Mini 25 Live Centre with 1MT Shank

   

 

LC252

Mini 25 Live Centre with 2MT Shank

   

 

LC321

Standard 32 Live Centre with 1MT Shank

   

LC322

Standard 32 Live Centre with 2MT Shank

   

LC323

Standard 32 Live Centre with 3MT Shank

   


HOLLOW 32 BORING LIVE CENTRE :

Deep hole (8mm or 5/16") boring is much easier thanks to our unique "Centre Finder" which cuts out all the fitting and removal of a Centre Pin before you can start boring.
The Centre Pin is only popped in by hand afterwards if you want to skim the end of the workpiece. There are other thoughtful features such as the rear lead to protect your boring auger.
Use in conjunction with a
Marlin Counterbore (Code MD426) to give you the worlds best performing combination for deep hole projects.

How the centre finder works:
(1) Slide it through the tailstock to locate the workpiece,
(2) Engage Hollow Centre in Workpiece
(3) Withdraw Rod & start boring. It's that easy

Order No.

Description

Ex. VAT

Inc. VAT

 

LH321

Hollow 32 Boring Live centre with centre finder & 1MT Shank

   

 

LH322

Hollow 32 Boring Live centre with centre finder & 2MT Shank

   

 

LH323

Hollow 32 Boring Live centre with centre finder & 3MT Shank

   

 


SUPER 32 LIVE CENTRE :

Featuring three higher grade large dia (28mm) deep groove EU manufactured bearings, this centre packs more than one surprise, with a wide choice of our unique quick fit "push-in" & "pull-out" action Tips, easy replacement bearings – DIY kit or back-to-base.

LS25: 25mm x 60deg Standard Tip

LS10: Extended Tip 10mm

LS16: Ring Centre 16mm with adjustable centre

LS36: Internal Cup Centre 36mm

LS38: Faceplate 38mm

In short it offers a new class standard for value and performance in the following options:-

Order No.

Description

Ex. VAT

Inc. VAT

 

LS321S

Super 32 Live Centre unit with 1MT Shank and a  set of five tips in a plastic box

   

 

LS322S

Super 32 Live Centre unit with 2MT Shank and a  set of five tips in a plastic box

   

 

LS323S

Super 32 Live Centre unit with 3MT Shank and a  set of five tips in a plastic box

   

 

LS321

Super 32 Live Centre unit with 1MT Shank (tips not included)

   

 

LS322

Super 32 Live Centre unit with 2MT Shank (tips not included)

   

 

LS323

Super 32 Live Centre unit with 3MT Shank (tips not included)

   

 

LS10

10mm dia Extended Super 32 Live Centre Tip

   

 

LS16

16mm dia Ring Centre Super 32 Tip

   

 

LS25

25mm dia x 60 deg Super 32 Live Centre Tip

   

 

LS36

36mm Internal Cup Centre Super 32 Tip

   

 

LS38

38mm Faceplate Super 32 Tip

   

 


PROMAX 38 LIVE CENTRE :

Designed and refined over a number of years to meet the demands of the most discerning hobbyist and professional woodturner, this centre is without compromise in any department.

PM01 : Standard Flush 60 deg tip

PM12: 12mm dia extended tip

PM16: 16mm Ring Centre with adjustable centre point.

Superbly specified with bigger wide spaced EU bearings and a substancial mid-thrust race, to take both heavy axial and radial loads, plus a choice of three screw-in hardened interchangeable tips, puts this centre in a league of its own.

FOOTNOTE: We've been offering a replacement bearing service on Promax for 6 years. So far we only one has re-bearinged….. well it was an early one.

Order No.

Description

Ex. VAT

Inc. VAT

 

PM381

Promax 38 Live Centre Unit with 1MT Shank (Tips not included)

   

 

PM382

Promax 38 Live Centre Unit with 2MT Shank (Tips not included)

   

 

PM383

Promax 38 Live Centre Unit with 3MT Shank (Tips not included)

   

 

PM01

Standard Flush 60 deg Tip for Promax 38

   

 

PM12

12mm Extended Tip for Promax 38

   

 

PM16

16mm Ring Centre Tip with adjustable centre point for Promax 38

   

Technology Supplies Logo
 

HEGNER U.K.
Phoenix House, Tern Hill, Market Drayton, Shropshire, TF9 3PX, England.

SALES: +44 (0)1630 637375
TECHNICAL: +44 (0)1630 637376
FAX: +44 (0)1630 637377
E-Mail: sales@hegner.co.uk