(915mm)
Swing over floor: "H" model, up to 92"Ø (2340mm)
"L" model, up to 86"Ø (2185mm)
WITH OPTIONAL "STANDARD" TAILSTOCK FITTED
Swing over bed: up to 26"Ø (660mm)
Max distance between centres: up to 31" (790mm)
WITH OPTIONAL "SHORTBED" TAILSTOCK FITTED
Swing over bed: up to 27"Ø (690mm)
Max distance between centres: up to 24" (610mm)
SPEED RANGE
Pulley step 1: infinitely variable between 50 — 500rpm
Pulley step 2: infinitely variable between 150 — 1350rpm
Pulley step 3: infinitely variable between 250 — 2600rpm
MOTOR
2 hp/1500 watt, 240volt, 3 phase continuously rated motor wired through phase inverter for
use with 1 phase (domestic) supply
(3 hp /2250 watt motor with commensurate electronics optional.)
MANDREL SHAFT
60mmØ x 500mm o/a length. Bored through for vacuum chuck. 3 M.T. swallow. Fitted with
8" (200mm) Ø rear handwheel. Nose fitting: 3 point 'bayonet' pattern for complete security in
forward/reverse
(Thread adaptors available for any required spec.)
CONTROLS
Housed in magnetically backed box on 2 metre, 24volt lead. Provides: Stop/Start; Fwd/Rev;
Fast/Slow braking and acceleration to pre-selected speed; 10 revolution speed selection dial
with lock; System diagnostic OK and Fault lights. (Footswitch optional.)
TOOLREST BEAM
"Floating" beam clamps in required location by internal folding-wedge mechanism operated
by external crank handle. Gives complete range of toolrest positioning options around any
form up to 36"Ø x 26" length.
(Floorstanding toolrest holder optional.)
DIMENSIONS
Footprint of pedestal lathe: 21" x 20" (526 x 500mm)
Footprint with HD tailstock added: 65" x 25" (1650 x 640mm)
Overall height: "H" model, 52" (1325mm)
"L" model, 49" (1245mm)
Turning axis (centre) height above floor: "H" model, 46" (1170mm)
"L" model, 43" (1095mm)
WEIGHT
Pedestal lathe with toolrest beam: 583 lbs (265 kgs)
As Above with HD tailstock fitted: 847 lbs (385 kgs)
As above with shortbed tailstock fitted: 689 lbs (304 kgs)
FINISH
Dark green, electrostatic powder coat oven baked at 200ºC
STANDARD EQUIPMENT
12" (300mm) toolrest; 5
